Logging Snmp-Requests Set Severity; Logging Syslog - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.5.11 logging snmp-requests set severity

With this command you can define the severity level of logging SNMP SET
requests.
Default
Disabled
Format
logging snmp-requests set severity <level|[0-7]>
Mode
Global Config
level | [0-7]
Enter Logging Severity Level (emergency|0, alert|1, critical|2, error|3,
warning|4, notice|5, info|6, debug|7).
Note: Selecting a lower severity level (larger number) will include all
messages from higher severity levels (smaller numbers).

4.5.12 logging syslog

This command enables syslog logging.
Default
disabled
Format
logging syslog
Mode
Global Config
no logging syslog
U
This command disables syslog logging.
Format
no logging syslog
CLI L2E
Release 8.0 05/2013
4.5 Syslog Commands
133