Storm-Control Flowcontrol - Hirschmann RS20 Reference Manual

4.6.67 storm-control flowcontrol

This command enables 802.3x flow control for the switch.
Note: This command only applies to full-duplex mode ports.
Default
disabled
Format
storm-control flowcontrol
Mode
Interface Config
Global Config
no storm-control flowcontrol
U
This command disables 802.3x flow control for the switch.
Note: This command only applies to full-duplex mode ports.
Format
no storm-control flowcontrol
Mode
Interface Config
Global Config
194
4.6 Device Configuration Commands
CLI L2E
Release 8.0 05/2013