Users Defaultlogin; Users Login <User - Hirschmann RS20 Reference Manual

4.7.4 users defaultlogin

This command assigns the authentication login list to use for non-configured
users when attempting to log in to the system. This setting is overridden by
the authentication login list assigned to a specific user if the user is config-
ured locally. If this value is not configured, users will be authenticated using
local authentication only.
Format
users defaultlogin <listname>
Mode
Global Config
listname
Enter an alphanumeric string of not more than 15 characters.
4.7.5 users login <user>
Enter user name.
Format
users login <user> <listname>
Mode
Global Config
no users login <user>
U
This command removes an operator.
Format
no users login <user> <listname>
Mode
Global Config
Note:
The 'admin' user account cannot be deleted.
CLI L2E
Release 8.0 05/2013
4.7 User Account Management Commands
213