Show Vlan - Hirschmann RS20 Reference Manual

Note: This command is available for the devices RS20/RS30/RS40,
MS20/MS30 and OCTOPUS.
Shows the mode for the ingress limiter. The factory default is: Broad-
casts only.
Ingress Limit
Shows the ingress rate limit. The factory default is: 0.
Egress Broadcast Limit
Shows the egress broadcast rate limit. The factory default is: 0.
Egress Limit (all traffic)
Note: This command is available for the devices RS20/RS30/RS40,
MS20/MS30 and OCTOPUS.
Shows the egress rate limit for all frame types.
The factory default is: 0.

4.6.50 show vlan

This command displays detailed information, including interface information,
for a specific VLAN. The ID is a valid VLAN identification number
Format
show vlan <vlanid>
Mode
Privileged EXEC and User EXEC
VLAN ID
There is a VLAN Identifier (VID) associated with each VLAN. The
range of the VLAN ID is 1 to 4042.
VLAN Name
A string associated with this VLAN as a convenience. It can be up to
32 alphanumeric characters long, including blanks. The default is
blank. VLAN ID 1 always has a name of `Default`. This field is
optional.
180
4.6 Device Configuration Commands
CLI L2E
Release 8.0 05/2013