Sntp - Simple Network Time Protocol; Show Sntp - Hirschmann RS20 Reference Manual

4.10 SNTP - Simple Network
Time Protocol
These commands show and configure the SNTP parameters.

4.10.1 show sntp

This command shows all SNTP settings.
Format
show sntp
Mode
Privileged EXEC and User EXEC
SNTP Server Anycast Address
Show SNTP Server Anycast Address (a.b.c.d).
SNTP Server Anycast Transmit Interval
Show SNTP Anycast Transmit Interval (in seconds).
SNTP Server Anycast VLAN
Show SNTP Server Anycast VLAN.
SNTP Server Disable if Timesource is local
Show SNTP Server Disable if Timesource is local (Yes/No).
SNTP Client Accepts Broadcasts
Show SNTP Client Accepts Broadcasts (Yes/No).
SNTP Client Disable after Synchronization
Show SNTP Client Disable after Synchronization (Yes/No).
SNTP Client Request Interval
Show SNTP Client Request Interval (in seconds).
266

4.10 SNTP - Simple Network Time Protocol

CLI L2E
Release 8.0 05/2013