Set Igmp Forward-Unknown - Hirschmann RS20 Reference Manual

4.6.19 set igmp forward-unknown

Note: This command is available for MS20/MS30.
This command defines how to handle unknown multicast frames.
Format
set igmp forward-unknown
Mode
Global Config
discard
Unknown multicast frames will be discarded.
flood
Unknown multicast frames will be flooded.
query-ports
Unknown multicast frames will be forwarded only to query ports.
154
4.6 Device Configuration Commands
{ discard | flood | query-ports}
CLI L2E
Release 8.0 05/2013