Show Bridge Duplex-Mismatch-Detect; Show Bridge Framesize; Show Bridge Vlan-Learning - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.1.7 show bridge duplex-mismatch-detect

This command displays the Bridge Duplex Mismatch Detection setting
(Enabled or Disabled).
Format
show bridge duplex-mismatch-detect
Mode
Privileged EXEC and User EXEC

4.1.8 show bridge framesize

This command displays the maximum size of frame (packet size) setting.
Format
show bridge framesize
Mode
Privileged EXEC and User EXEC

4.1.9 show bridge vlan-learning

This command displays the bridge vlan-learning mode.
Format
show bridge vlan-learning
Mode
Privileged EXEC and User EXEC
CLI L2E
Release 8.0 05/2013
4.1 System Information and Statistics
45