Snmp-Server Enable Traps Chassis - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.4.47 snmp-server enable traps chassis

Configures whether traps that are related to the chassis functionality of the
switch will be sent. These functions include the signal contacts, the ACA,
temperature limits exceeded, changes in the module map, addition or
removal of SFP modules, status of power supply has changed and the LLDP
and SNTP features. May be enabled or disabled.
Default: enabled.
Default
enabled
Format
snmp-server enable traps chassis
Mode
Global Config
no snmp-server enable traps chassis
U
This command disables chassis traps for the entire switch.
Format
no snmp-server enable traps chassis
Mode
Global Config
114
4.4 Management Commands
Release 8.0 05/2013
CLI L2E