Show Classofservice Trust; Vlan Port Priority All - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.3.6 show classofservice trust

This command displays the current trust mode for the specified interface.
The slot/port parameter is optional. If specified, the trust mode of the inter-
face is displayed. If omitted, the most recent global configuration settings are
displayed.
Format
show classofservice trust [slot/port]
Mode
Privileged EXEC
Class of Service Trust Mode
The current trust mode: Dot1p, IP DSCP, or Untrusted.
Untrusted Traffic Class
The traffic class used for all untrusted traffic. This is only displayed
when the COS trust mode is set to 'untrusted'.
slot/port
Valid slot and port number separated by forward slashes.

4.3.7 vlan port priority all

This command configures the port priority assigned for untagged packets for
all ports presently plugged into the device. The range for the priority is 0-7.
Any subsequent per port configuration will override this configuration setting.
Format
vlan port priority all <priority>
Mode
Global Config
CLI L2E
Release 8.0 05/2013
4.3 Class of Service (CoS) Commands
77