Reboot - Hirschmann RS20 Reference Manual

4.8.27 reboot

This command resets the switch (cold start) after a given time delay, for warm
start See "reload" on page
are terminated and the boot code executes. The switch uses the stored con-
figuration to initialize the switch. You are prompted to confirm that the reset
should proceed. A successful reset is indicated by the LEDs on the switch.
Format
reboot {delay <seconds>}
Mode
Privileged EXEC
<seconds>
The number of seconds after which the switch will reboot.
Value range: None (no reboot sceduled), 0 - 2,147,483 sec (= 596 h +
31 min + 23 sec).
clear reboot
U
This command cancels a scheduled reboot.
240
242. Reset means that all network connections
4.8 System Utilities
CLI L2E
Release 8.0 05/2013