4.6.35 show auto-disable brief
Use this command to display the Auto Disable summary.
Format
show auto-disable brief
Mode
Global Config
Intf
Display the number of the interface in slot/port format.
Error reason
Display the error reason for auto-disable.
Possible values: no error, link-flap, crc-error, overload-detection.
Component name
Display the name of the component for auto-disable.
Remaining time(sec.)
Display the remaining time in seconds for auto-disable.
Possible values: 0 | 30..2147483.
Auto-Disable time(sec.)
Display the time for auto-disable in seconds.
Possible values: 0 | 30..2147483.
Auto-Disable oper state
Display the operational state of the auto-disable function.
Possible values: active, inactive.
166
4.6 Device Configuration Commands
CLI L2E
Release 8.0 05/2013