Show Mac-Filter-Table Static - Hirschmann RS20 Reference Manual

4.6.41 show mac-filter-table static

This command displays the Static MAC Filtering information for all Static
MAC Filters. If all is selected, all the Static MAC Filters in the system are
displayed. If a macaddr is entered, a vlan must also be entered and the Static
MAC Filter information will be displayed only for that MAC address and
VLAN.
Format
show mac-filter-table static {<macaddr> <vlanid> |
all}
Mode
Privileged EXEC and User EXEC
MAC Address
Is the MAC Address of the static MAC filter entry.
VLAN ID
Is the VLAN ID of the static MAC filter entry.
Source Port(s)
Indicates the source port filter set's slot and port(s).
Destination Port(s)
Indicates the destination port filter set's slot and port(s).
172
4.6 Device Configuration Commands
CLI L2E
Release 8.0 05/2013