Vlan Acceptframe - Hirschmann RS20 Reference Manual

4.6.71 vlan acceptframe

This command sets the frame acceptance mode per interface. For VLAN
Only mode, untagged frames or priority frames received on this interface are
discarded. For Admit All mode, untagged frames or priority frames received
on this interface are accepted and assigned the value of the interface VLAN
ID for this port. With either option, VLAN tagged frames are forwarded in ac-
cordance with the IEEE 802.1Q VLAN Specification.
Default
Admit All
Format
vlan acceptframe <vlanonly | all | untaggedonly>
Mode
Interface Config
all
Untagged frames or priority frames received on this interface are
accepted and assigned the value of the interface VLAN ID for this
port.
vlanonly
Only frames received with a VLAN tag will be forwarded. Other
frames will be dropped.
untaggedonly
Only frames received without a VLAN tag will be forwarded. Other
frames will be dropped.
Note: This command is available for devices of the RS20/RS30/
RS40, MS20/MS30, MACH102, RSR20/RSR30, MACH1020/
MACH1030 and OCTOPUS family.
198
4.6 Device Configuration Commands
CLI L2E
Release 8.0 05/2013