Set Igmp Automatic-Mode - Hirschmann RS20 Reference Manual

Command line interface industrial ethernet gigabit switch

Hide thumbs Also See for RS20:

Table of Contents

4.6.17 set igmp automatic-mode

If enabled, this port is allowed to be set as static query port automatically, if

the LLDP protocol has found a switch or router connected to this port. Use

the command's normal form to enable the feature, the 'no' form to disable it.

set igmp automatic-mode

Interface Config

4.6 Device Configuration Commands

Release 8.0 05/2013

Rs40 Rs30 Ms20 Ms30