CLI Commands: Base
4.4.11 network mgmt-access add
This command is used to configure the restricted management access
feature (RMA).
It creates a new empty entry at the <index> (if you enter the command with
parameter <index>) or at the next free index (if you enter the command
without parameter <index>).
Format
network mgmt-access add [index]
Mode
Global Config
[index]
Index of the entry in the range 1..16.
4.4.12 network mgmt-access delete
This command is used to configure the restricted management access
feature (RMA).
It deletes an existing entry with <index>.
Format
network mgmt-access delete <index>
Mode
Global Config
<index>
Index of the entry in the range 1..16.
86
4.4 Management Commands
Release 8.0 05/2013
CLI L2E