Logging Console - Hirschmann RS20 Reference Manual
Command line interface industrial ethernet gigabit switch
Hide thumbs
Also See for RS20:
- Reference manual (572 pages) ,
- User manual (294 pages) ,
- Programming manual (116 pages)
Table of Contents
Advertisement
CLI Commands: Base
4.5.4 logging console
This command enables logging to the console. The <severitylevel> value is
specified as either an integer from 0 to 7 or symbolically through one of the
following keywords: emergency (0), alert (1), critical (2), error (3), warning
(4), notice (5), informational (6), debug (7).
Default
disabled; alert
Format
logging console [severitylevel] | <[0-7]>
Mode
Global Config
severitylevel | [0-7]
Enter Logging Severity Level (emergency|0, alert|1, critical|2, error|3,
warning|4, notice|5, info|6, debug|7).
Note: Selecting a lower severity level (larger number) will include all
messages from higher severity levels (smaller numbers).
Possible severity levels: see Table 9
no logging console
U
This command disables logging to the console.
Format
no logging console
CLI L2E
Release 8.0 05/2013
4.5 Syslog Commands
129
Advertisement
Table of Contents
