Device-Status Connection-Error - Hirschmann RS20 Reference Manual

Command line interface industrial ethernet gigabit switch

Hide thumbs Also See for RS20:

Table of Contents

copy <url> system:bootcode

Use the "copy <url> system:bootcode" command to load the boot-

code file via tftp into the device. For <url> enter the path of the tftp

server using the following notation: "<tftp://ip/filepath/fileName>", e.g.

"tftp://10.1.112.214/switch/switch01.cfg".

4.8.20 device-status connection-error

This command configures the device status link error monitoring for this port.

device-status connection-error {ignore|propagate}

Interface Config

4.8 System Utilities

Release 8.0 05/2013

Rs40 Rs30 Ms20 Ms30