Show Classofservice Dot1P-Mapping - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.3.4 show classofservice dot1p-mapping

This command displays the current 802.1p priority mapping to internal traffic
classes for a specific interface. The slot/port parameter is required on
platforms that support priority to traffic class mapping on a 'per-port' basis.
Platforms that support priority to traffic class mapping on a per-port basis:
Format
show classofservice dot1p-mapping
Platforms that do not support priority to traffic class mapping on a per-port
basis:
Format
s
how classofservice dot1p-mapping
Mode
Privileged EXEC and User EXEC
CLI L2E
Release 8.0 05/2013
4.3 Class of Service (CoS) Commands
75