Snmp-Server Sysname; Snmp-Server Enable Traps - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.4.45 snmp-server sysname

This command configures the system name.
Format
snmp-server sysname <system name>
Mode
Global Config

4.4.46 snmp-server enable traps

This command enables the Authentication Trap Flag.
Default
enabled
Format
snmp-server enable traps
Mode
Global Config
no snmp-server enable traps
U
This command disables the Authentication Trap Flag.
Format
no snmp-server enable traps
Mode
Global Config
CLI L2E
Release 8.0 05/2013
4.4 Management Commands
113