1.9
Input/output interfaces
1.9.1
Signal contact
Figure 2: Signal contact: 2-pin terminal block with screw locking
In the state on delivery, the signal contact indicates the device status. It can
be configured using the device management.
1.9.2
Digital input (optional)
Note: Only for supply voltage with the following characteristic values:
CC
K9
The support of the function is dependent on the software release. Software
support for the function is unimplemented at the time of printing this manual.
Figure 3: Input: 2-pin terminal block with screw locking
Installation EAGLE20/30
Release 09 10/2015
29