Table of Contents
Advertisement
Router Design
3.7.7
Reset
When the "Power" LED on the front panel is illuminated, it is possible to
restore the default configuration of the router by pressing the "Reset" button.
After pressing the "Reset" button, the default configuration is restored and
the router reboots, the "Power" LED illuminates green again.
Note: We recommend that you back up the router configuration before
reseting the router. For detailed information about resetting the router refer
to the UM-Configuration manual. Resetting the router returns the
configuration to the default state.
Use a narrow screwdriver for pressing the "Reset" button located on the rear
panel.
It is important to distinguish the difference between resetting and rebooting
the router.
Action
Router behavior
Reboot Turn off and then turn on router.
Reset
Restore default configuration and reboot
the router
Table 6:
Description of Reset and Restart Router
3.7.8
Ethernet Ports ETH0 & ETH1
Panel socket RJ45.
32
3.7 Description of the Front Panel
Invoking events
Disconnect and connect the power.
Press "RST" button on rear panel
UM Installation OWL_LTE
Release 1.0 09/2015
Advertisement
Table of Contents
