Ethernet Ports Eth0 & Eth1; Usb Port; I/O Port - Hirschmann OWL LTE M12 User Manual

3.6.5 Ethernet Ports ETH0 & ETH1
4-pin D-coded M12 socket.
4 1
3 2
Table 7: Pin assignment of 10/100 Mbit/s twisted pair port, M12 socket
3.6.6

USB Port

Panel 5-pin A-coded M12 USB
Pin Signal Mark
1 +5 V
2 N.C.
3 USB data -
4 GND
5 USB data +
Table 8: USB connector pin-outs
Figure 10: USB connector
The router supports the following USB/RS232 converters:

FTDI
 Prolific PL2303

Silicon Laboratories CP210×
Note: We recommend to use the USB port exclusively for service purposes.
3.6.7

I/O Port

Panel 8-pin A-coded M12 socket.
Pin number Signal mark
1 IN0
2 IN0
3 IN1
4 IN1
Table 9: I/O connector pin-outs
22
Pin Function
1 TD+ Transmission path
2 RD+ Receive path
3 TD− Transmission path
4 RD− Receive path
Housing: shield
Description
Positive pole of 5 V DC supply voltage, 0.5 A
Not used
USB data signal – negative pole
GND Negative pole of DC supply voltage
USB data signal – positive pole
Description
Binary input 0
Binary input 0
Binary input 1
Binary input 1
Direction
Input/Output
Input/Output
Installation OWL LTE M12
Release 04 06/2017