Set Igmp Static-Query-Port - Hirschmann RS20 Reference Manual

4.5.12 set igmp static-query-port

This command activates the forwarding of IGMP membership report frames
to this interface even if the given interface has not received any queries. The
purpose is that a port may need to forward such frames even if no queries
have been received on it (e. g., if a router is connected to the interface that
sends no queries).
Default
disabled
Format
set igmp static-query-port
Mode
Interface Config
no set igmp
U
This command disables the unconditional forwarding of IGMP member-
ship report frames to this interface.
Format
no set igmp static-query-port
Mode
Interface Config
108
4.5 Device Configuration Commands
CLI L2B
Release 4.0 11/07