Ethernet Ports; 10/100 Mbit/S Twisted Pair Port; 100/1000 Mbit/S F/O Port (Optional); 100/1000 Mbit/S Twisted Pair Port (Optional) - Hirschmann EAGLE20 series User Manual

1.6

Ethernet ports

You can connect terminal devices and other segments on the ports of the
device via twisted pair cables or F/O cables.
1.6.1

10/100 Mbit/s twisted pair port

This port is an RJ45 socket.
The 10/100 Mbit/s twisted pair port offers you the ability to connect network
components according to the IEEE 802.3 10BASE-T/100BASE-TX standard.
This port supports:

Autonegotiation

Autopolarity
 Autocrossing (if autonegotiation is activated)

100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
 10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
Delivery state: autonegotiation active.
The socket housing is electrically connected with the front panel.
Table 6: Pin assignment of the 10/100 Mbit/ twisted pair port, RJ-45 socket, MDI-X
mode
1.6.2

100/1000 Mbit/s F/O port (optional)

This port is an SFP slot.
The 100/1000 Mbit/s F/O port offers you the ability to connect network
components according to the IEEE 802.3 100BASE-FX/1000BASE-
SX/1000BASE-LX standard.
This port supports:
 Full duplex mode
1.6.3

100/1000 Mbit/s twisted pair port (optional)

Note: Applies solely for EAGLE20/30 devices with HiSecOS from software
version 01.2.00
This port is an SFP slot.
The 100/1000-Mbit/s twisted pair port offers you the possibility to connect
network components according to the IEEE 802.3 100BASE-FX/1000BASE-
SX/1000BASE-LX standard.
22
Pin
1
1
2
2
3
3
4
6
5
4,5,7,8
6
7
8
Function
RD+ Receive path
RD− Receive path
TD+ Transmission path
TD− Transmission path
—
Installation EAGLE20/30
Release 06 04/2014