Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Edge-Core EWS100
Summary of Contents for Edge-Core EWS100
- Page 1 EWS100 Wireless LAN Controller...
-
Page 2: Copyright Notice
Quick Installation Guide EWS100 ENGLISH Copyright Notice This document is protected by USA copyright laws and other laws and is the property of Edgecore Networks Corporation. You may not copy, reproduce, distribute, publish, display, perform, or modify any part of this publication in any form or by any means without prior written permission from Edgecore Networks Corporation. -
Page 3: Package Contents
1. EWS100 x 1 This Quick Installation Guide provides 2. Quick Installation Guide (QIG) x 1 instructions on how to install the EWS100 3. Ethernet Cable x 1 and to get the network up and running with 4. Power Adapter (12V/1A) x 1 basic configurations. -
Page 4: System Overview
Quick Installation Guide EWS100 ENGLISH System Overview Front Panel LED Indicators: Power: Steady green light indicates a proper connection to a power source. Status: Blinking green light indicates that the system is in the process of initializing. It turns steady-on when the system is in operation state. -
Page 5: Hardware Installation
2. Connect the WAN1 (Port1) of the EWS100 to a switch of an internal network, or directly to the ISP modem / router, using an Ethernet cable. The LED of this port will be on, indicating a proper connection. -
Page 6: Getting Started
Web Management Interface (WMI) for the first time. Connect your administrative PC directly to a LAN port of the EWS100 via an Ethernet cable. The PC should be assigned an IP Address in the same subnet as the EWS100’s (192.168.1.0/255.255.0.0). - Page 7 Quick Installation Guide EWS100 ENGLISH Launch a web browser and enter the IP Address of Default Service Zone (192.168.1.254) in the address field. Log in using default Username (admin) and Password (admin) on the Administrator Login Page: After a successful login, the system prompts for the administrator to change password for security reasons.
- Page 8 Quick Installation Guide EWS100 ENGLISH Welcome to System Main Menu page will appear after a successful login with the new password. ⑥...
-
Page 9: Basic Configurations
< Setup Wizard > Use Setup Wizard (the button on the top right corner) Step 3: Local User Account (Optional Step) to set up the EWS100 with basic configurations for Create a new user account in the Local account the first time: database. - Page 10 Quick Installation Guide EWS100 ENGLISH A Confirm and Restart message will appear during the restarting process. Please do not interrupt the system until the Administrator Login Page appears. The system will try to reach a DNS server at this stage. Therefore, it may ...
- Page 11 2. Launch a web browser and enter any HTTP website URL. The default User Login Page will appear. Well Done! The EWS100 is now up and running with the basic configurations. 3. Enter the Username and Password of a local user account previously created via Setup Wizard (e.g.