Texas Instruments TMS320C28x Reference Manual page 436

POP T:ST0
SYNTAX OPTIONS
POP T:ST0
Operands T:ST0
Description
Flags and
Modes
Repeat
0111 0110 0001 0101
The upper 16-bits of the multiplicand register and status register 0
Predecrement SP by 2. Load ST0 with the value pointed to by SP and load T
with the value pointed to by SP+1. The low 16 bits of the XT Register (TL) are
left unchanged:
SP −= 2;
T = [SP];
ST0 = [SP+1];
TL = unchanged;
None
This instruction is not repeatable. If this instruction follows the RPT
instruction, it resets the repeat counter (RPTC) and executes only once.
Pop Top of Stack to T and ST0
OPCODE OBJMODE
POP T:ST0
RPT CYC
X − 1
6-279