Texas Instruments TMS320C28x Reference Manual page 226

CLRC OBJMODE
SYNTAX OPTIONS
CLRC OBJMODE
Operands
OBJ-
MODE
Description
Flags and
OBJ-
MODE
Modes
Repeat
Example
; Set the device mode from reset to C27x object-compatible mode:
Reset:
CLRC OBJMODE
CLRC AMODE
.c28_amode
CLRC M0M1MAP
.
.
0101 0110 0011 0110
Status bit
Clear the OBJMODE status bit, enabling the device to execute C27x object
code.
Note: The pipeline is flushed when this instruction is executed.
The OBJMODE bit is cleared.
This instruction is not repeatable. If this instruction follows the RPT
instruction, it resets the repeat counter (RPTC) and executes only once.
; Enable C27x Object Mode
; Enable C27x/C28x Address Mode
; Tell assembler we are in C27x/C28x addr mode
; Enable C27x Mapping Of M0 and M1 blocks
Clear the OBJMODE Bit
OPCODE OBJMODE
CLRC OBJMODE
RPT CYC
X − 5
6-69