Falcon GC
3.5 The Chromperfect Selection Tab
Now that the instrument has been configured, you should be ready to
claim the instrument. This ensures that only the specific PC that you are
using will communicate with the GC.
3.5.1 Claiming the Instrument and Setting the Data
Directory
1. Click on the "C" Chromperfect icon to open the Chromperfect
banner
2. Then click on click on Run to open the Chromperfect Run or
Data Acquisition tab.
The Run screen will open with a yellow background. If you already
had the Run screen open and your background is cyan instead of yellow,
then you must click the "Selection" tab on the far right-hand side of the
screen.
Teledyne Analytical Instruments
Installation
13