6
1.1.1
External Power Supply
Figure 1-2
locations for the power connector. Refer to
Figure 1-2: IsoPlane Power Supply
Table 1-1:
Pin Number
1.1.2
Data Cables
The following computer cables are included with the IsoPlane:
•
•
If neither of these cables is compatible with the host system, contact Princeton Instruments
about obtaining a custom cable. If you have facilities for building a custom cable, refer to
the RS-232 pin assignments listed in
Appendix D, RS-232
1.1.3
Grating Turret
Each IsoPlane is shipped with, and includes, one grating turret.
illustrates a typical IsoPlane power supply with an inset providing the pin
Key
Pin
1
2
3
4
IsoPlane Power Connector Pinout Information
Definition
1
+5V
2
GND
3
GND
4
+24
3650-USB-06 USB Cable Type A to Type B.
CC-499-2 IBM AT or compatible 9-pin female (DB9S) connector to 9-pin male
connector (DB9P).
Interface, on page 71.
NOTE:
Additional turrets are available from Princeton Instruments. Refer
to
Section C.2, Triple-Grating
information.
Table 1-1
for specific pinout information.
Table
1-1. Additional information in available in
Turrets, on page 63, for ordering