Method Settings; Method Selection - Teledyne Foxy R1 Instruction Manual

® ®
Foxy R1 and Foxy R2 Fraction Collectors
Section 3 Programming

3.3 Method Settings

Figure 3-7 Method Settings Menu

3.3.1 Method Selection

Figure 3-8 Method Selection Menu
3-10
Method settings define the fraction collector operation for a run.
The fraction collector displays the Method Settings menu (Figure
3-7) when you touch the folder icon on Main menu. Use this
menu to program the current method or select another of the
eight stored methods.
Refer to section 3.3.1 for information on selecting and naming
methods. Sections 3.3.2 through 3.3.7 describe how to program
the current method.
Enter
Drop Counts
Time Intervals
Volume (Pump Counts)
To view the name of the current method, touch the folder icon
from the Method Settings menu. The displayed list of methods
highlights the current method name (Figure 3-8).
To select a different method, use the Up and Down Arrows to
highlight the desired method. Touch the Enter icon to accept the
new method and return to the Method Settings display.
Method A
Method B
16mmTube
Method D
DefaultE
DefaultF
DefaultG
DefaultH
You can also rename the methods. After highlighting a method,
touch the Folder icon. The fraction collector displays a text
editing screen (Figure 3-9) from which you can rename the
method.
Use the Left and Right Arrows to move the cursor and the Up
and Down Arrows to change the character or number. When com-
plete, touch the Enter icon to save the name and return to the
Method Selection menu.
Method Selection
Threshold Peak Detection
Slope Peak Detection
Time Windows