Speed - H3C S3100 Series Command Manual

undo shell
View
User interface view
Parameters
None
Description
Use the shell command to enable terminal services.
Use the undo shell command to disable terminal services.
By default, terminal services are disabled in all user interfaces.
Note the following when using the undo shell command:
Terminal services cannot be disabled in AUX user interfaces.
This command is unavailable in the current user interface.
The execution of this command requires user confirmation.
Examples
# Disable terminal services in VTY 0 through VTY 4 (assuming that you log in through an AUX user
interface).
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface vty 0 4
[Sysname-ui-vty0-4] undo shell
% Disable ui-vty0-4 , are you sure ? [Y/N]y

speed

Syntax
speed speed-value
undo speed
View
AUX user interface view
Parameters
speed-value: Transmission speed (in bps). This argument can be 300, 600, 1200, 2400, 4800, 9600,
19,200, 38,400, 57,600, and 115,200.
Description
Use the speed command to set the transmission speed of the user interface.
Use the undo speed command to revert to the default transmission speed.
By default, the transmission speed is 9,600 bps.
1-21