Mitsubishi 3000GT Service Manual page 96

Rear bank
Front bank
6
ENGINE
Using a wrench, hold the camshaft at its hexagon and tighten
the bolt to specification.
Caution
Locking the camshaft sprocket with a tool damages the
sprocket.
Tighten the rocker cover bolts in the order shown in the illustra-
tion.
NOTE
in length.
Rear bank No. 5 bolt . . . . . . . . . . . . . . . 20 mm (.79 in.)
Except rear bank No. 5 bolt . . . . . . . . 10 mm (.39 in.)
(2) Bolts are color-coded for the front and rear banks as
follows:
Front bank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear bank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Green
(3) When the rocker cover gasket has been replaced, tighten
bolts in this order, and then retighten bolts 1 to 6 to 4
Nm (2.9 ft.lbs.).
TSB Revision
Black