To air bag module
To aicbag module
To SRS diagnosis unit
GENERAL
(6) Remove the steering wheel by using special tool.
Caution
Do not hammer on the steering wheel. Doing so may
damage the collapsible column mechanism.
(7) Remove the steering column covers. (Refer to GROUP
52A - Instrument Panel.)
(8) Remove the clock spring. (Refer to GROUP 52B - Air
Bag Module and Clock Spring.)
(9) Check clock spring connectors and protective tube for
damage, and terminals for deformities.
(10)Visually check the clock spring case and the gears for
damage.
and, after turning the vehicle's front wheels to straight-
ahead position, install the clock spring to the column
switch.
Caution
If the clock spring's mating mark is not properly
aligned, the steering wheel may not be completely
rotational during a turn, or the flat cable within the
clock spring may be severed, obstructing normal op-
eration of the SRS and possibly leading to serious
injury to the vehicle's driver and passenger.