Show Zoneset - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show zoneset

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show zoneset
To display the configured zone sets, use the show zoneset command.
Syntax Description active
vsan
vsan-id
brief
name
zoneset-name
pending
Defaults None.
Command Modes EXEC mode
Command History Release
1.2(2)
Usage Guidelines
None.
Examples The following example displays configured zone set information.
switch# show zoneset vsan 1
zoneset name ZoneSet2 vsan 1
Cisco MDS 9000 Family Command Reference
22-452
show zoneset [[active [vsan vsan-id]] |
[brief [active [vsan vsan-id] | vsan vsan-id]] |
[name zoneset-name
[active vsan vsan-id] |
[brief [active vsan vsan-id | vsan vsan-id]] |
[pending [active vsan vsan-id | brief [active vsan vsan-id | vsan vsan-id] | vsan vsan-id]] |
[vsan vsan-id]] |
[pending
[active vsan vsan-id] |
[brief [active vsan vsan-id | vsan vsan-id]] |
[vsan vsan-id]] |
[vsan vsan-id]]
Displays only active zone sets.
Displays the VSAN.
Specifies the ID of the VSAN. The range is 1 to 4093
Displays zone set members in a brief list.
Displays members of a specified zone set.
Specifies the zone set name. The maximum is 64.
Displays zone sets members that are in session.
Modification
This command was modified.
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x