Show Platform Stack-Manager - Cisco WLC 5700 Series Command Reference Manual

show platform stack-manager

show platform stack-manager
To display platform-dependent switch-stack information, use the show platform stack-manager command
in privileged EXEC mode.
show platform stack-manager {oir-states| sdp-counters| sif-counters} switch stack-member-number
Syntax Description
oir-states
sdp-counters
sif-counters
switch stack-member-number
Command Default
None
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS XE 3.2SE
Usage Guidelines
Use the show platform stack-manager command to collect data and statistics for the switch stack.
Use this command only when you are working directly with your technical support representative while
troubleshooting a problem. Do not use this command unless your technical support representative asks you
to do so.
High Availability Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series)
24
Displays Online Insertion and Removal (OIR) state information
Displays Stack Discovery Protocol (SDP) counter information.
Displays Stack Interface (SIF) counter information.
Specifies the stack member for which to display stack-manager
information.
Modification
This command was introduced.
High Availability Commands
OL-32317-01