Show Wwn - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show wwn

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show wwn
To display the status of the WWN configuration, use the show wwn command.
Syntax Description
status block-id number Displays WWN usage and alarm status for a block ID. The range is 34 to
switch
vsan-wwn
Defaults None.
Command Modes
EXEC mode.
Command History Release
1.0(2)
3.0(1)
Usage Guidelines None.
Examples The following example displays the WWN of the switch:
switch# show wwn switch
Switch WWN is 20:01:ac:16:5e:52:00:01
The following example displays a user-configured VSAN WWN:
switch# show wwn vsan-wwn
vsan wwn configured by user
---- ----------------------
100 20:64:08:00:88:0d:5f:81
Cisco MDS 9000 Family Command Reference
22-440
show wwn {status block-id number | switch | vsan-wwn}
1793.
Displays switch WWN.
Displays all user-configured VSAN WWNs.
Modification
This command was introduced.
Added the vsan-wwn keyword.
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x