Show Ip Bgp Nexthop-Database - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Show Commands

show ip bgp nexthop-database

To display Border Gateway Protocol (BGP) next-hop database, use the show ip bgp nexthop-database
command.
Syntax Description vrf vrf-name
Command Default
None
Command Modes
Any command mode
Command History Release
5.0(3)A1(1)
Usage Guidelines
This command requires the LAN Enterprise Services license.
Examples
This example shows how to display the BGP next-hop database:
switch(config)# show ip bgp nexthop-database
Next Hop table for VRF default, address family IPv4 Unicast:
Nexthop: 0.0.0.0, Refcount: 1, IGP cost: 0
IGP Route type: 0, IGP preference: 0
Nexthop is not-attached local unreachable
Nexthop last resolved: never, using 0.0.0.0/0
Metric next advertise: Never
RNH epoch: 0
Nexthop: 192.0.0.0, Refcount: 0, IGP cost: -1
IGP Route type: 0, IGP preference: 0
Nexthop is not-attached not-local unreachable
Nexthop last resolved: never, using 0.0.0.0/0
Metric next advertise: Never
RNH epoch: 0
switch(config)#
Related Commands Command
show ip bgp neighbors Displays BGP neighbor information.
OL-27852-01
show ip bgp nexthop-database [vrf vrf-name]
(Optional) Specifies the virtual router context (VRF) name. The name can be any
case-sensitive, alphanumeric string up to 32 characters.
Modification
This command was introduced.
Description
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
show ip bgp nexthop-database
447