Show Ip Dhcp Snooping Database - Cisco Catalyst 4500 Series Command Reference Manual

show ip dhcp snooping database

show ip dhcp snooping database
To display the status of the DHCP snooping database agent, use the show ip dhcp snooping database
command.
Syntax Description
detail
Defaults
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(12c)EW
12.1(19)EW
Examples This example shows how to display the DHCP snooping database:
Switch# show ip dhcp snooping database
Agent URL :
Write delay Timer : 300 seconds
Abort Timer : 300 seconds
Agent Running : No
Delay Timer Expiry : Not Running
Abort Timer Expiry : Not Running
Last Succeded Time : None
Last Failed Time : None
Last Failed Reason : No failure recorded.
Total Attempts
Successful Transfers :
Successful Reads
Successful Writes
Media Failures
Switch#
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-710
show ip dhcp snooping database [detail]
(Optional) Provides additional operating state and statistics information.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Added support of state and statistics information.
:
:
:
:
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
0 Startup Failures :
0 Failed Transfers :
0 Failed Reads :
0 Failed Writes :
0
0
0
0
0
OL-25342 -01