Show Port-Channel Database - Cisco Nexus 5000 Series Command Reference Manual

show port-channel database

show port-channel database
To display the aggregation state for one or more EtherChannel interfaces, use the show port-channel database
command.
show port-channel database [interface port-channel number [. subinterface-number]]
Syntax Description
interface
port-channel number
.subinterface-number
Command Default
None
Command Modes
EXEC mode
Command History
Release
4.0(0)N1(1a)
Examples This example shows how to display the aggregation state of all EtherChannel interfaces:
switch# show port-channel database
port-channel19
port-channel21
Cisco Nexus 5000 Series Interfaces Command Reference
146
Last membership update is successful
4 ports in total, 4 ports up
First operational port is Ethernet199/1/24
Age of the port-channel is 0d:09h:11m:30s
Time since last bundle is 0d:09h:12m:20s
Last bundled member is
Ports: Ethernet199/1/24
Ethernet199/1/28
Ethernet199/1/30
Ethernet199/1/31
Last membership update is successful
1 ports in total, 1 ports up
First operational port is Ethernet2/3
(Optional) Displays information for an EtherChannel
interface.
(Optional) Displays aggregation information for a
specific EtherChannel interface. The number range
is from 1 to 4096.
(Optional) Subinterface number. Use the
EtherChannel number followed by a dot (.) indicator
and the subinterface number. The format is
portchannel-number.subinterface-number.
Modification
This command was introduced.
[active ] [up] *
[active ] [up]
[active ] [up]
[active ] [up]
Show Commands