Show Interface Mac-Address; Ethernet1/2 - Cisco Nexus 5000 Series Command Reference Manual

show interface mac-address

show interface mac-address
To display the information about the MAC address, use the show interface mac-address command.
show interface [type slot / port| portchannel-no] mac-address
Syntax Description
type
slot /port
portchannel-no
Command Default
None
Command Modes
EXEC mode
Command History
Release
4.0(0)N1(1a)
Usage Guidelines
If you do not specify an interface, the system displays all the MAC addresses.
Examples This example shows how to display the information on MAC addresses for the entire switch:
switch# show interface mac-address
----------------------------------------------------------------------------
Interface
----------------------------------------------------------------------------
Ethernet1/1

Ethernet1/2

Ethernet1/3
Ethernet1/4
Ethernet1/5
Ethernet1/6
Ethernet1/7
Ethernet1/8
Ethernet1/9
Ethernet1/10
Ethernet1/11
Cisco Nexus 5000 Series Interfaces Command Reference
124
(Optional) Interface for which MAC addresses should
be displayed. T he type can be either Ethernet or
EtherChannelor vethernet.
Ethernet interface port number and slot number. The
slot number is from 1 to 255, and the port number is
from 1 to 128.
EtherChannel number. The EtherChannel number is
from 1 to 4096.
Modification
This command was introduced.
Mac-Address Burn-in Mac-Address
0005.9b78.6e7c 0005.9b78.6e48
0005.9b78.6e7c 0005.9b78.6e49
0005.9b78.6e7c 0005.9b78.6e4a
0005.9b78.6e7c 0005.9b78.6e4b
0005.9b78.6e7c 0005.9b78.6e4c
0005.9b78.6e7c 0005.9b78.6e4d
0005.9b78.6e7c 0005.9b78.6e4e
0005.9b78.6e7c 0005.9b78.6e4f
0005.9b78.6e7c 0005.9b78.6e50
0005.9b78.6e7c 0005.9b78.6e51
0005.9b78.6e7c 0005.9b78.6e52
Show Commands