Show Mac Address-Table Interface - Cisco ME 3800X Command Reference Manual

Chapter

show mac address-table interface

To display the MAC address table information for the specified interface in the specified VLAN, use the
show mac address-table interface command in user EXEC mode.
Syntax Description interface-id
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(52)EY
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show mac address-table interface command:
Switch> show mac address-table interface gigabitethernet0/2
------------------------------------------
Vlan
----
1
1
Total Mac Addresses for this criterion: 2
OL-28238-01
show mac address-table interface interface-id [vlan vlan-id] [ | {begin | exclude | include}
expression]
Specifies an interface type; valid interfaces include physical ports and port
channels.
(Optional) Displays entries for a specific VLAN; the range is 1 to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Mac Address Table
Mac Address Type
----------- ----
0030.b635.7862 DYNAMIC Gi0/2
00b0.6496.2741 DYNAMIC Gi0/2
Ports
-----
Cisco ME 3800X and ME 3600X Switch Command Reference
show mac address-table interface
-115