Show Mac Address-Table Interface - Cisco Catalyst 3560-X Command Reference Manual

show mac address-table interface

show mac address-table interface
Syntax Description
Command Modes
Command History
Usage Guidelines
Examples
Catalyst 3750-X and 3560-X Switch Command Reference
2-678
Downloaded from www.Manualslib.com
Use the show mac address-table interface user command to display the MAC address table information
for the specified interface in the specified VLAN.
show mac address-table interface interface-id [vlan vlan-id] [ | {begin | exclude | include}
expression]
interface-id Specify an interface type; valid interfaces include physical ports and port
channels.
vlan vlan-id (Optional) Display entries for a specific VLAN; the range is 1 to 4094.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
User EXEC
Release Modification
12.2(53)SE2 This command was introduced.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
This is an example of output from the show mac address-table interface command:
Switch> show mac address-table interface gigabitethernet6/0/2
Mac Address Table
------------------------------------------
Vlan Mac Address Type
---- ----------- ----
1 0030.b635.7862 DYNAMIC Gi6/0/2
1 00b0.6496.2741 DYNAMIC Gi6/0/2
Total Mac Addresses for this criterion: 2
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Ports
-----
OL-21522-02