Layer 3 Commands - Dell PowerConnect 8024 Cli Reference Manual

Command
dot1x guest-vlan
show dot1x advanced
radius-server attribute 4
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.

Layer 3 Commands

ARP (IPv4)
Command
arp
arp cachesize
arp dynamicrenew
arp purge
arp resptime
arp retries
arp timeout
clear arp-cache
clear arp-cache management
ip proxy-arp
show arp
show arp brief
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Description
Defines a guest VLAN.
Displays 802.1X advanced features for the switch or
specified interface.
Sets the network access server (NAS) IP address for the
RADIUS server.
Description
Creates an Address Resolution Protocol (ARP) entry.
Configures the maximum number of entries in the ARP
cache.
Enables the ARP component to automatically renew
dynamic ARP entries when they age out.
Causes the specified IP address to be removed from the
ARP cache.
Configures the ARP request response timeout.
Configures the ARP count of maximum request for retries. GC
Configures the ARP entry age-out time.
Removes all ARP entries of type dynamic from the ARP
cache.
Removes all entries from the ARP cache learned from the
management port.
Enables proxy ARP on a router interface.
Displays the Address Resolution Protocol (ARP) cache.
Displays the brief Address Resolution Protocol (ARP) table
information.
Mode*
IC
PE
GC
Mode*
GC
GC
GC
PE
GC
GC
PE
PE
IC
PE
PE
77
Command Groups