Dell PowerConnect 8024 Cli Reference Manual page 59

Ethernet Configuration
Command
clear counters
description
duplex
flowcontrol
interface ethernet
interface range ethernet
mtu
negotiation
show interfaces advertise
show interfaces configuration
show interfaces counters
show interfaces counters
show interfaces description
show interfaces status
show statistics ethernet
show storm-control
shutdown
speed
storm-control broadcast
storm-control multicast
storm-control unicast
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Description
Clears statistics on an interface.
Adds a description to an interface.
Configures the full/half duplex operation of a given
Ethernet interface when not using auto-negotiation.
Configures the flow control on a given interface.
Enters the interface configuration mode to configure an
Ethernet type interface.
Enters the interface configuration mode to configure
multiple Ethernet type interfaces.
Enables jumbo frames on an interface by adjusting the
maximum size of a packet or maximum transmission
unit (MTU).
Enables auto-negotiation operation for the speed and
duplex parameters of a given interface.
Displays information about auto negotiation advertisement. PE
Displays the configuration for all configured interfaces.
Displays traffic seen by the physical interface.
Displays traffic seen by the interface, including Received
Priority Flow Control Frames and Transmitted PFC Frames
for a given ethernet or port-channel interface.
Displays the description for all configured interfaces.
Displays the status for all configured interfaces.
Displays statistics for one port or for the entire switch.
Displays the storm control configuration.
Disables interfaces.
Configures the speed of a given Ethernet interface when
not using auto-negotiation.
Enables Broadcast storm control.
Enables the switch to count Multicast packets together with
Broadcast packets.
Enables Unicast storm control.
Mode*
PE
IC
IC
GC
GC
GC
IC
IC
UE
UE
PE
UE
UE
PE
PE
IC
IC
IC
IC
IC
59
Command Groups