Arp Cachesize - Dell PowerConnect M6348 Cli Reference Manual

arp
Use the arp command in Global Configuration mode to create an Address Resolution Protocol
(ARP) entry. Use the no form of the command to remove the entry.
Syntax
ip-address mac-address
arp
ip-address
no arp
ip-address — IP address of a device on a subnet attached to an existing routing interface.
•
mac-address — A unicast MAC address for that device.
•
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example creates an ARP entry consisting of an IP address and a MAC address.
console(config)#arp 192.168.1.2 00A2.64B3.A245

arp cachesize

Use the arp cachesize command in Global Configuration mode to configure the maximum
number of entries in the ARP cache. To return the maximum number ARP cache entries to the
default value, use the no form of this command.
Syntax
arp cachesize
no arp cachesize
• integer — Maximum number of ARP entries in the cache. (Range: 256–1024)
Default Configuration
The default integer value is 896.
558
integer