Dell PowerConnect 8024 Cli Reference Manual page 62

Command
ip default-gateway
ip domain-lookup
ip domain-name
ip helper-address
ip host
ip name-server
ipv6 address
ipv6 enable
ipv6 gateway
show arp switch
show hosts
show ip helper-address
show ip interface management
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
IPv6 ACL
Command
{deny | permit}
ipv6 access-list
ipv6 access-list rename
ipv6 traffic-filter
show ipv6 access-lists
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
62
Command Groups
Description
Defines a default gateway (router).
Enables IP DNS-based host name-to-address translation.
Defines a default domain name to complete unqualified
host names.
Allows the device to forward User Datagram Protocol
(UDP) broadcasts received on an interface.
Configures static host name-to-address mapping in the host
cache.
Configures available name servers.
Set the IPv6 address of the management interface.
Enable IPv6 on the management interface.
Configures an IPv6 gateway for the management interface. GC
the entries in the ARP table.
Displays
Displays the default domain name, a list of name server
hosts, static and cached list of host names and addresses.
Displays the ip helper addresses configuration.
Displays the management IP interface information.
Description
Creates a new rule for the current IPv6 access list.
Creates an IPv6 Access Control List (ACL) consisting of
classification fields defined for the IP header of an IPv6
frame.
Changes the name of an IPv6 ACL.
Attaches a specific IPv6 ACL to an interface or associates it
with a VLAN ID in a given direction.
Displays an IPv6 access list (and the rules defined for it).
Mode*
GC
GC
GC
GC
GC
GC
GC
GC
PE
UE
PE
PE
Mode*
v6ACL
GC
GC
GC
IC
PE