Dell PowerConnect 8024 Cli Reference Manual page 68

Cli reference guide
Hide thumbs Also See for PowerConnect 8024:
Table of Contents

Advertisement

Command
classofservice trust
conform-color
cos-queue min-bandwidth
cos-queue strict
diffserv
drop
mark cos
mark ip-dscp
mark ip-precedence
match class-map
match cos
match destination-address mac
match dstip
match dstip6
match dstl4port
match ethertype
match ip6flowlbl
68
Command Groups
Description
Sets the class of service trust mode of an interface.
Specifies for each outcome, the only possible actions are
drop, set-cos-transmit, set-sec-cos-transmit, setdscp-
transmit, set-prec-transmit, or transmit
Specifies the minimum transmission bandwidth for each
interface queue.
Activates the strict priority scheduler mode for each
specified queue.
Sets the DiffServ operational mode to active.
Use the drop policy-class-map configuration command to
specify that all packets for the associated traffic stream are
to be dropped at ingress.
Marks all packets for the associated traffic stream with the
specified class of service value in the priority field of the
802.1p header.
Marks all packets for the associated traffic stream with the
specified IP DSCP value.
Marks all packets for the associated traffic stream with the
specified IP precedence value.
Adds add to the specified class definition the set of match
conditions defined for another class.
Adds to the specified class definition a match condition for
the Class of Service value.
Adds to the specified class definition a match condition
based on the destination MAC address of a packet.
Adds to the specified class definition a match condition
based on the destination IP address of a packet.
adds to the specified class definition a match condition
based on the destination IPv6 address of a packet.
Adds to the specified class definition a match condition
based on the destination layer 4 port of a packet using a
single keyword, or a numeric notation.
Adds to the specified class definition a match condition
based on the value of the ethertype.
Adds to the specified class definition a match condition
based on the IPv6 flow label of a packet.
Mode*
GC and
IC
PCMC
GC and
IC
GC and
IC
GC
PCMC
PCMC
PCMC
PCMC
CMC
CMC
CMC
CMC
v6CMC
CMC
CMC
v6CMC

Advertisement

Table of Contents
loading

Table of Contents