Stats; Table 3-2. Network Statistics - Bay Networks 5393 Hardware Installation Manual

Chapter 3 ROM Monitor Commands
3-24 Remote Annex 5393/PRI Hardware Installation Guide

stats

The stats command displays current network statistics gathered by
the ROM. Use stats along with the boot command to help isolate
problems. Table 3-2 describes the network statistics displayed by the
stats command. The syntax is:
stats
The stats command display looks like this:
monitor:: stats
Ethernet Statistics
Frames Received:
CRC Errors:
Alignment Errors
Resource Drops:
Bus Wait Drops:
Bad Types/Lengths:

Table 3-2. Network Statistics

Statistic
Frames Received
CRC Errors
Alignment Errors
Resource Drops
(continued on next page)
398 Frames Sent:
0 Carrier Sense Losses:
0 Clear to Send Losses:
0 Collisions Detected:
0 Excessive Collision Losses: 0
0
Description
The number of frames received.
The number of CRC checksum errors detected.
The number of frames received misaligned with a
CRC error.
The number of packets dropped because the ROM
code could not buffer them quickly enough. The
ROM code cannot always handle back-to-back
incoming packets. The Remote Annex accepts the
first response it receives and drops all others.
Dropped packets are normal.
3
0
0
0