Stats; Table 3-3. Network Statistics - Bay Networks Remote Annex 4000 Hardware Installation Manual

stats

The stats command displays current network statistics gathered by
the ROM. Use stats along with the boot command to help isolate
problems. Table 3-3 describes the network statistics displayed by the
stats command. The syntax is:
stats [–slip]
The stats command display looks like this:
monitor:: stats
Ethernet Statistics
Frames Received:
CRC Errors:
Alignment Errors
Resource Drops:
Bus Wait Drops:
Bad Types/Lengths:

Table 3-3. Network Statistics

Statistic Description
Frames Received The number of frames received.
CRC Errors The number of CRC checksum errors detected.
Alignment Errors The number of frames received misaligned with a
CRC error.
Resource Drops The number of packets dropped because the ROM
code could not buffer them quickly enough. The
ROM code cannot always handle back-to-back
incoming packets. The Remote Annex 4000 accepts
the first response it receives and drops all others.
Dropped packets are normal.
(continued on next page)
Remote Annex 4000 Hardware Installation Guide
Chapter 3
398 Frames Sent:
0 Carrier Sense Losses:
0 Clear to Send Losses:
0 Collisions Detected:
0 Excessive Collision Losses: 0
0
ROM Monitor Commands
3
0
0
0
3-33