Arp Restricted-Forwarding Enable; Display Arp Detection - HP 6125G Command Reference Manual

Description
Use arp detection validate to configure ARP detection based on specified objects. You can specify one
or more objects in one command line.
Use undo arp detection validate to remove detected objects. If no keyword is specified, all the detected
objects are removed.
By default, ARP detection based on specified objects is disabled.
Examples
# Enable the checking of the MAC addresses and IP addresses of ARP packets.
<Sysname> system-view
[Sysname] arp detection validate dst-mac src-mac ip

arp restricted-forwarding enable

Syntax
arp restricted-forwarding enable
undo arp restricted-forwarding enable
View
VLAN view
Default level
2: System level
Parameters
None
Description
Use arp restricted-forwarding enable to enable ARP restricted forwarding.
Use undo arp restricted-forwarding enable to disable ARP restricted forwarding.
By default, ARP restricted forwarding is disabled.
Examples
# Enable ARP restricted forwarding in VLAN 1.
<Sysname> system-view
[Sysname] vlan 1
[Sysname-vlan1] arp restricted-forwarding enable

display arp detection

Syntax
display arp detection [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
262